Superluck Offset Prepress (OEM) Co., Ltd.

  • Thermal CTP N UV CTP Processor
  • Thermal CTP N UV CTP Processor
Thermal CTP N UV CTP Processor
next

Thermal CTP N UV CTP Processor

  • Description
  • Make an Inquiry


Superluck Thermal CTP/UV CTP Plate Processor Vedio on Youtube:
Product Name: CTP Processor, Thermal CTP Processor, UV CTP Processor
Product Function:
Superluck CTP Plate Processor is especially used to develop Thermal CTP Plates and UV CTP Plates. The whole working process contains four steps: Developing + Washing +Gumming +Baking/Drying.

Product Features:

1.PVC tank and duralumin body resistant to corrosion.

2. Extra-long developing with stable uniformity, especially adaptive to high-speed photosensitization thermal or UV CTP plates.

3. Overdeveloping gum roller assures no damage to the surface and two sets of wash brushes assures sufficient development.

4. Independent develop cooling system keeps the develop temperature fluctuation within 0.5 dgree Celcius.

5. Accurate automatic anti-oxidation detecting and replenishing system of Superluck CTP plate processor controls developing concentration.

6. Automatic cleaning and recycling.

7. Precise PLC control, processing without any letup.

8. Energy saving and environment friendly.

Product Specification:

odel

SL-65TH

SL-88TH

105TH

SL-135TH

Material

Thermal CTP plate

Capacity

20­-150 cm/min

Plate width (mm)

650

880

1050

1350

Min. Plate length(mm)

300

450

450

450

Plate thickness(mm)

0.15-0.4

Tank content, developer(L)

25

50

55

68

Tank content, wash(L)

9

13.5

15

20

Adjustable temperature, dev

0 to 40 degree C. adjustable

Adjustable temperature, dry

normal temperature to 70 degree C.

Water consumption, max

6 L/min

8 L/min

9 L/min

12 L/min

Diameter of wash brush (mm)

50

Rotary speed of wash brush

80 rpm

Filter(um)

75

Water supply

Tap water (min. pressure 1 bar)

Gumming

Roller pressing gumming

Diameter of roller

60mm

Dev. replenishment

0-1L per plate

Dev. heating-up rate

0.5 degree C. per minute

Horizontal adjustment

Adjustable

Power supply

380V 3 phases 50-60Hz

Power consumption (kwh)

3.5

3.5

3.8

4.5

Voltage fluctuation

within 10%

Gross weight(kg)

400

500

610

780

Net weight(kg)

320

420

450

650

Product Photo Show:

Product Certificate:

Product Packing:
Fumigated Cartons Packing
Product Warranty:
One year's warranty for machine and endless online service available
Product Trouble Shooting:
1) My plate processor cannot boot or the LCD screen without any signal ?
  • 1Check to be sure the power supply terminal is powered on , the circuit breaker is tripped.
  • Not cut the main power switch to ON (1) position , the power cannot enter the machine.
  • Safety emergency stop button is not the role of reversion , can also cause this problem, pull up the emergency stop button , emergency stop button will indeed return .
  • Because the circuit safe design, the main power supply has sent machines still press the green start button , the machine only way to start.
  • To maintain the machine to avoid abnormal current is too large , the circuit elements destroy the original , main circuit fuse design, the fuse blows , electricity can not be supplied to the host. Before replacing the fuse , be sure the unit will power off the circuit breaker has indeed . Indeed according to the design specifications of the fuse should be replaced, replace the fuse large , will cause the motor driver board circuit board burned
  • Open the electrical box cover , such as found electrical box with red and green lights , and the machine itself has power, but does not have any on the LCD display , there are two possibilities:
LCD signal cable loose : cable plug and seat section is not really inserted , causing all signals on the motherboard cannot be sent to the LCD.
Need to adjust LCD backlight : LCD display backlight is adjustable to accommodate different perspectives operator optimum display brightness adjustment is not the time , LCD screen does not seem any signals.

2)0When the plate processor starts to develop plate, the machine does not move.

  • Developing syrup actual temperature below the set temperature condition, the machine does not allow developing plate. Check whether the set temperature of plate processor and actual temperature are the same.
  • Gear stuck
  • A. LCD operating panel showing normal procedure to process plate, but the transmission gear if wear caused stuck, will enable the motor can not effectively drive, examine each transmission gear is a serious wear caused by teeth not normal occlusion phenomenon, if there is, you need to replace the new gear.
  • Input plate induced SENSOR induction distance adjustment inappropriate or fault. Input plate induction SENSOR columns with the adjusting screw can be small, small screwdriver adjusting sensing distance. There is light induced SENSOR bottom, bright or not bright, said SENSOR induction into things and no induction. Metal thin version close to test whether the normal induction SENSOR.
  • Roller motor fuse board if burned, roll wheel motor cannot rotate, can also cause abnormal phenomenon to develop plate. Check the drive plate fuse is burned, as has been burned, please replace the fuse specifications; another may fuse is not burned but drive plate itself has obvious burn marks, then you must replace the drive plate. Update the driver plate, driving the small knob plate should be adjusted to a proper position can make the drive plate play optimal efficacy.

3) Plate developing has been completed, plate processor still does not stop.
  • A normal phenomenon

Standby, every few minutes, plate processor will automatically turn a few seconds set, to avoid the rubber roll bonding.

  • The induction of SENSOR fault

Open the box cover can be found on the left of the machine, the idler rollers driven by the motor, there is an induction of SENSOR, if a fault, will cause scour ability version does not stop phenomenon.

  • The plate of SENSOR fault of induction

AWhen the induction of SENSOR induction distance is too long input plate, may make the SENSOR error caused by induction, the wrong signal to provide uninterrupted, continuous does not stop. Open the electric appliance box front cover, check whether the induction of SENSOR end lights off (SENSOR in induction of ON state)

BWhen input the plate induction SENSOR dirty, may make the SENSOR error caused by induction, the wrong signal to provide uninterrupted, continuous punching machine is version does not stop. Open the electric appliance box front cover, check whether the induction of SENSOR end lights off (SENSOR in induction of ON state)

4) Brush does not rotate: LCD showed a normal, but the brush does not rotate, it may be the following reasons
  • Brush gear

Brush gear wear, gear spacing and gear is incorrect, cause. Examine the brush transmission gear is the phenomenon, if have, should remove the gear wear, replace the new gear. The gear is fixed, but with the two set screw locking, remove the screw, the gear can be removed.

  • The transmission shaft and shaft seat

The transmission shaft and the shaft seat jammed because of wear caused, the shaft cannot rotate, and motor cannot effectively.

  • Brush motor drive board fault

AMotor drive board fault, cause the motor cannot be driven. To examine the motor fuse board has been burned, if has blown fuse replacement, new specifications must be appropriate.

BThe fuse is not burned, but examine motor drive board like burns or smell the smell burning, motor driver board may have burned, the replacement of the new motor drive plate must be.

5) Stop in the process of developing plate?

Input plate induction SENSOR failure or induction distance is too short:

Input plate SENSOR if not indeed induction, will not be able to be really the right length induction version, will make the version of edition has not completed all the form, which has made the computer think scour ability version finished. Try adjusting the longer induction distance scour ability version of SENSOR that induced SENSOR induction, avoid because of local plate is not smooth or other factors induced adverse.

Superluck Slogan:

Choose Superluck, win super printing.

CTP Plate vaccum uv exposure unit offset ctp machine for printing revelador para plancha termal ctp photopolymer plate making machine plate register punch ctpプレートプロセッサ ausetter,ctp printing machine offset plate baking oven oven for offset plates ctp plate setter new 2014 CTP machine CTP platesetter CTP thermal Processor for CTP UV CTP Processing Conventional CTP Processor Processor of conventional CTP Thermal CTP Plates used ctp machine ctp machine price violet ctp plates fuji ctp plates used ctp for sale ctp cron used ctp creo trendesetter kodak ctp machine ctp plate making machine ctp parts heidelberg ctp used screen ctp offset ctp plate kodak ctp flexo ctp kodak thermal ctp plate used ctp ctp flexo plate machine china ctp plates uv ctp machine laser diode for ctp ciaat ctp 3010 kodak ctp plate inkjet ctp plates ctp plate processor thermal ctp plate processor machine ctp agfa ctp plate agfa plate agfa ctp heidelberg ctp price ctp printing machine ctp processor conventional ctp machine ctp thermal plate ctp developer ctp plate machinery trendsetter ctp thermal ctp ctp printing plate cron ctp size ctp plate ctp plate baking oven silver ctp plate plate ctp positive thermal ctp plate ctp screen violet ctp uv ctp ctp plate agfa cron uv ctp ctp flexo sale thermal ctp plate photopolymer ctp plate huaguang positive ctp plate ctp luscher used uv ctp ctp plate production line ctp plate manufacturer ctp printing ctp conventional plate fuji thermal ctp plate ctp plate developer ctp plate printing chemical ctp printing plates baking oven offset ctp printing plates agfa ctp thermal plate ctp thermal printing plates ctp machine screen negative ctp plate kodak ctp positive thermal ctp plate ctp plate print china ctp ctp thermal offset plate thermal offset ctp plate aluminum offset ctp thermal plate thermal positive ctp plate ctp plate printer computer to plate ctp ctp offset plate screen ctp plate ctp plate coil production line china thermal ctp plate ctp machine for printing aluminum thermal ctp plate printing high quality ctp plate digital ctp plate ctp plate maker plate maker plate exposure offset printing down frame vacuum plate exposing unit contact printer plate puncher and bender plate register puncher plate punching plate processor and developer Film processor developer imagesetter plate making machinery CTP plate baker UV CTP plate burner plate burning oven stand plate oven grafmac ctp huqiu ctp konita ctp plates lucky huanguang ctp plates fountain solution filtration system dampening solution filter printer machine press heidelberg newspaper printer machine press heidelberg offset printer machine press heidelberg Printing machinery printer machine press newspaper offset printer machine press newspaper Printing machinery printer machine press offset Printing machinery printer machine heidelberg newspaper offset printer machine heidelberg newspaper Printing machinery printer machine heidelberg offset Printing machinery printer machine newspaper offset Printing machinery printer machine press heidelberg printer machine press newspaper printer machine press offset printer machine press Printing machinery printer machine heidelberg newspaper printer machine heidelberg offset printer machine heidelberg Printing machinery printer machine newspaper offset printer machine newspaper Printing machinery printer machine offset Printing machinery printer machine press heidelberg newspaper offset printer machine press heidelberg newspaper Printing machinery printer machine press heidelberg offset Printing machinery printer machine press newspaper offset Printing machinery printer machine heidelberg newspaper offset Printing machinery ctp platesetter paper plate making machine heidelberg cd 102 ctp platesetter paper plate making machine man roland ctp platesetter paper plate making machine agfa film processor ctp platesetter paper plate making machine newspaper printing machine ctp platesetter heidelberg cd 102 man roland ctp platesetter heidelberg cd 102 agfa film processor ctp platesetter heidelberg cd 102 newspaper printing machine ctp platesetter man roland agfa film processor ctp platesetter man roland newspaper printing machine ctp platesetter agfa film processor newspaper printing machine



Home   |  About Us   |  Printing Info.   |  Transactions   |  Contact Us   |  Products   |  SiteMap